Laser Upgrade your Shapeoko 3!
This kit has everything you need to hook up your laser to the Shapeoko3 CNC system (regular, not XL or XXL) as seen on the INSTRUCTIONS PAGE. If you want to upgrade your XL or XXL then you will need to mount your driver on the Z gantry.
- Power Extension Cord: For extending the power to mount the driver on the electronics box.
- Laser Mount: To put in the spindle holder for the laser.
- Laser Mount Screws/Nuts: To mount the laser on the laser mount.
- Laser Driver Mount Screws/Nuts: Screws to attach the driver to the electronics enclosure.
- Zip Ties: To clean everything up for cabling.
- Zip Tie Holder: To place on the Z axis gantry to hold the laser cable in place and out of the way.
If you have a 3D printer and want to print your own mount it is open source and located HERE: