Laser Upgrade your Shapeoko 3 XL or XXL!
In this kit you will mount the driver next to the electronics box on the side of the machine. It includes all of the extension cables needed to go 13′ away from the laser driver.
This kit has everything you need to hook up your laser to the Shapeoko3 CNC system as seen on the INSTRUCTIONS PAGE. The only difference is the mounting of the driver.
- Power Extension Cord: For extending the power to mount the driver on the electronics box.
- Laser Mount: To put in the spindle holder for the laser.
- Laser Mount Screws/Nuts: To mount the laser on the laser mount.
- Laser Driver Mount Screws/Nuts: Screws to attach the driver to the electronics enclosure.
- Zip Ties: To clean everything up for cabling.
- Zip Tie Holder: To place on the Z axis gantry to hold the laser cable in place and out of the way.
- Laser Extension Cord: 10′ cord to extend the laser from the driver total of 13′.
- Laser Fan Extension Cord: 13′ laser fan extension.
If you have a 3D printer and want to print your own mount it is open source and located HERE: