The guys over at suckitdustboot.com have made a really neat add on to the Shapeoko3 by adding a dust boot. We thought this was a good opportunity to look at making the laser work with it as well. It will add some some vacuum ability as well to remove smoke. We recommend using a separate shop vacuum for the laser as not to have adverse effects with the dust.
There are three options on this product.
- Just Side Mount = Just the plastic side mount.
- Side Mount Shapeoko3 Kit = The plastic side mount and everything in the Small Shapeoko3 mounting kit.
- Side Mount Shapeoko3 XL and XXL Kit = The plastic side mount and everything in the Shapeoko3 XL and XXL kit.
The Suckit Side Mount for the Shapoko3 will mount using the existing screws for the spindle mount. Just take the screws out, place the mount in the side to match the screw location, and then re tighten the screws.