Laser Upgrade Your X Carve!
The kit works with all old and new X Carve machines. For the new X Carves, the input Molex cable has been extended to be able to go all the way back to the X Controller. For old machines, you will need to cut this cable to size.
The X Carve Mounting Kit contains:
- Power Extension Cord: For extending the power to mount the driver on the Z axis Gantry.
- Laser Mount: To put in the spindle holder for the laser.
- Laser Mount Screws/Nuts: To mount the laser on the laser mount.
- Laser Spindle Mount Screws/Nuts: Longer M4 Screws to be able to place the laser mount in the spindle holder.
- Laser Driver Mount Bottom: Bottom piece for mounting the driver on the Z axis Gantry.
- Laser Driver Mount Top: Top piece for the quick release laser driver mount.
- Laser Driver Mount Screws/Nuts: Screws to attach the top and bottom laser driver mount pieces together.
- Zip Ties: To clean everything up for cabling.
- Zip Tie Holder: To place on the Z axis gantry to hold the laser cable in place.
- Molex Mini Fit Cable: Input control cable for the laser driver.
X Carve Laser Mount