+================================================
+                                                
+ Grbl - Vectric machine output configuration file   
+                                                
+================================================
+                                                
+ History                                        
+                                                  
+ Who      When       What                         
+ ======== ========== ===========================
+ PaulW    01/20/2016 turn Spindle off during rapids
+ EdwardP  11/02/2015 Written from Grbl_mm.pp but
+                     set G21
+================================================
 
POST_NAME = "Stepcraft V3 PWM Laser (mm) (*.tap)"
 
FILE_EXTENSION = "tap"
 
UNITS = "MM"
 
+------------------------------------------------
+    Line terminating characters                 
+------------------------------------------------
 
LINE_ENDING = "[13][10]"
 
+------------------------------------------------
+    Block numbering                             
+------------------------------------------------
 
LINE_NUMBER_START     = 0
LINE_NUMBER_INCREMENT = 10
LINE_NUMBER_MAXIMUM = 999999
 
+================================================
+                                                
+    Formating for variables                     
+                                                
+================================================
 
VAR LINE_NUMBER = [N|A|N|1.0]
VAR SPINDLE_SPEED = [S|A|S|1.0]
VAR FEED_RATE = [F|C|F|1.1]
VAR X_POSITION = [X|C|X|1.3]
VAR Y_POSITION = [Y|C|Y|1.3]
VAR Z_POSITION = [Z|C|Z|1.3]
VAR ARC_CENTRE_I_INC_POSITION = [I|A|I|1.3]
VAR ARC_CENTRE_J_INC_POSITION = [J|A|J|1.3]
VAR X_HOME_POSITION = [XH|A|X|1.3]
VAR Y_HOME_POSITION = [YH|A|Y|1.3]
VAR Z_HOME_POSITION = [ZH|A|Z|1.3]
 
+================================================
+                                                
+    Block definitions for toolpath output       
+                                                
+================================================
 
+---------------------------------------------------
+  Commands output at the start of the file
+---------------------------------------------------
 
begin HEADER
 
"T1"
"G17"
"G21"
"G0[ZH]"
"G0[XH][YH]"
"M5"
 
 
+---------------------------------------------------
+  Commands output for rapid moves 
+---------------------------------------------------
 
begin RAPID_MOVE
 
"G0[X][Y][Z]"
 
 
+---------------------------------------------------
+  Commands output for the first feed rate move
+---------------------------------------------------
 
begin FIRST_FEED_MOVE
 
"G1[X][Y][Z][F]"
 
 
+---------------------------------------------------
+  Commands output for feed rate moves
+---------------------------------------------------
 
begin FEED_MOVE
 
"G1[X][Y][Z]"
 
 
+---------------------------------------------------
+  Commands output for the first clockwise arc move
+---------------------------------------------------

begin FIRST_CW_ARC_MOVE

"G2[X][Y][I][J][F]"
 
 
+---------------------------------------------------
+  Commands output for clockwise arc  move
+---------------------------------------------------
 
begin CW_ARC_MOVE
 
"G2[X][Y][I][J]"
 
 
+---------------------------------------------------
+  Commands output for the first counterclockwise arc move
+---------------------------------------------------
 
begin FIRST_CCW_ARC_MOVE
 
"G3[X][Y][I][J][F]"
 
 
+---------------------------------------------------
+  Commands output for counterclockwise arc  move
+---------------------------------------------------
 
begin CCW_ARC_MOVE
 
"G3[X][Y][I][J]"
 
 
+ ---------------------------------------------------
+  Commands output for Retract Moves-Turn Laser Off
+ ---------------------------------------------------
begin RETRACT_MOVE

"M5"


+ ---------------------------------------------------
+  Commands output for Plunge Moves-Turn Laser On
+ ---------------------------------------------------

begin PLUNGE_MOVE

"M3[S]"

+---------------------------------------------------
+  Commands output at the end of the file
+---------------------------------------------------
 
begin FOOTER
 
"M5"
"G0[ZH]M30"
"G0[XH][YH]"
"M2"