+================================================
+                                                
+ UCCNC - Vectric machine output configuration file   
+                                                
+================================================
+                                                
+ History                                        
+                                                  
+ Who      When       What                         
+ ======== ========== ===========================
+ CHRISC    09/07/2022 written for CNC4Newbies UCCNC PWM
+================================================
 
POST_NAME = "UCCNC PWM Laser (inch) (*.txt)"
 
FILE_EXTENSION = "txt"
 
UNITS = "INCHES"
 
+------------------------------------------------
+    Line terminating characters                 
+------------------------------------------------
 
LINE_ENDING = "[13][10]"
 
+------------------------------------------------
+    Block numbering                             
+------------------------------------------------
 
LINE_NUMBER_START     = 0
LINE_NUMBER_INCREMENT = 10
LINE_NUMBER_MAXIMUM = 999999
 
+================================================
+                                                
+    Formating for variables                     
+                                                
+================================================
 
VAR LINE_NUMBER = [N|A|N|1.0]
VAR SPINDLE_SPEED = [Q|A|Q|1.2]
VAR FEED_RATE = [F|C|F|1.1]
VAR X_POSITION = [X|C|X|1.3]
VAR Y_POSITION = [Y|C|Y|1.3]
VAR Z_POSITION = [Z|C|Z|1.3]
VAR ARC_CENTRE_I_INC_POSITION = [I|A|I|1.3]
VAR ARC_CENTRE_J_INC_POSITION = [J|A|J|1.3]
VAR X_HOME_POSITION = [XH|A|X|1.3]
VAR Y_HOME_POSITION = [YH|A|Y|1.3]
VAR Z_HOME_POSITION = [ZH|A|Z|1.3]
 
+================================================
+                                                
+    Block definitions for toolpath output       
+                                                
+================================================
 
+---------------------------------------------------
+  Commands output at the start of the file
+---------------------------------------------------
 
begin HEADER
 
 "( [TP_FILENAME] )"
"( File created: [DATE] - [TIME])"
"( for UCCNC from CNC4Newbie )"
"( Material Size)"
"( X= [XLENGTH], Y= [YLENGTH], Z= [ZLENGTH])"
"([FILE_NOTES])"
"(Toolpaths used in this file:)"
"([TOOLPATHS_OUTPUT])"
"(Tools used in this file: )"
"([TOOLS_USED])"
"[N]G00G20G17G90G40G49G80"
"[N]G70G91.1"
"[N] ([TOOLNAME])"
"[N](Toolpath:- [TOOLPATH_NAME])"
"[N]([TOOLPATH_NOTES])"
"[N]G94"
"[N][ZH]"
"[N][XH][YH][F]"
"[N]M03"
 
+---------------------------------------------------
+  Commands output for rapid moves 
+---------------------------------------------------
 
begin RAPID_MOVE
 
"[N]G0[X][Y][Z]"
 
 
+---------------------------------------------------
+  Commands output for the first feed rate move
+---------------------------------------------------
 
begin FIRST_FEED_MOVE
 
"[N]G1[X][Y][Z][F]"
 
 
+---------------------------------------------------
+  Commands output for feed rate moves
+---------------------------------------------------
 
begin FEED_MOVE
 
"[N]G1[X][Y][Z]"
 
 
+---------------------------------------------------
+  Commands output for the first clockwise arc move
+---------------------------------------------------

begin FIRST_CW_ARC_MOVE

"[N]G2[X][Y][I][J][F]"
 
 
+---------------------------------------------------
+  Commands output for clockwise arc  move
+---------------------------------------------------
 
begin CW_ARC_MOVE
 
"[N]G2[X][Y][I][J]"
 
 
+---------------------------------------------------
+  Commands output for the first counterclockwise arc move
+---------------------------------------------------
 
begin FIRST_CCW_ARC_MOVE
 
"[N]G3[X][Y][I][J][F]"
 
 
+---------------------------------------------------
+  Commands output for counterclockwise arc  move
+---------------------------------------------------
 
begin CCW_ARC_MOVE
 
"[N]G3[X][Y][I][J]"
 
 
+ ---------------------------------------------------
+  Commands output for Retract Moves-Turn Laser Off
+ ---------------------------------------------------
begin RETRACT_MOVE

"[N]M11"
"[N]G1[X][Y][Z][F]"

+ ---------------------------------------------------
+  Commands output for Plunge Moves-Turn Laser On
+ ---------------------------------------------------

begin PLUNGE_MOVE

"[N]G1[X][Y][Z][F]"
"[N]M10[Q]"

+---------------------------------------------------
+  Commands output at the end of the file
+---------------------------------------------------
 
begin FOOTER
 
"[N]M5"
"[N]G0[ZH]"
"[N]M30"
"[N]G0[XH][YH]"
"[N]M2"