{"id":1058,"date":"2014-02-03T19:06:59","date_gmt":"2014-02-03T19:06:59","guid":{"rendered":"https:\/\/jtechphotonics.com\/?page_id=1058"},"modified":"2020-05-07T15:00:05","modified_gmt":"2020-05-07T21:00:05","slug":"printrbot-3d-printer-implementation","status":"publish","type":"page","link":"https:\/\/jtechphotonics.com\/?page_id=1058","title":{"rendered":"PrintRBot Upgrade"},"content":{"rendered":"<p>The PrintRBot is a cool printer that you can either assemble yourself or get an assembled kit. &nbsp;The machine uses the PrintRBoard which has been a part of the Rep Rap project for some time. &nbsp;The details are located here on the Rep Rap wiki: &nbsp;<a href=\"http:\/\/reprap.org\/wiki\/Printrboard\">http:\/\/reprap.org\/wiki\/Printrboard<\/a><\/p>\n<p>Just like the other upgrade implementations, the easiest way to upgrade the PrintRBot is to use the fan output from the control board. &nbsp;This way, the firmware is already done and you are ready to go. &nbsp;Simply attach new molex connector with wires (either found <a title=\"Molex Jumper 2 wire connector\" href=\"https:\/\/jtechphotonics.com\/?product=molex-jumper-2-wire-connector\">here in the sho<\/a>p or make your own) to the laser driver input. &nbsp;Just make sure to connect the wires to the correct side on the laser driver. &nbsp;Or to be super cool, put a SPDT switch on the positive side of the fan output and connect it to both the fan and the laser driver. &nbsp;Connect the ground and you are good to go. &nbsp;Easily switch between 3D printing and the laser with a flick of the switch!<\/p>\n<h3>Electrical connection<\/h3>\n<p>Here is the graphical version of the instructions:<\/p>\n<p><a href=\"https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/PrintRBot-laser-upgrade-implementation.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter size-full wp-image-1059\" src=\"https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/PrintRBot-laser-upgrade-implementation.jpg\" alt=\"PrintRBot laser upgrade implementation\" width=\"576\" height=\"576\" srcset=\"https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/PrintRBot-laser-upgrade-implementation.jpg 576w, https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/PrintRBot-laser-upgrade-implementation-200x200.jpg 200w, https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/PrintRBot-laser-upgrade-implementation-100x100.jpg 100w, https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/PrintRBot-laser-upgrade-implementation-150x150.jpg 150w, https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/PrintRBot-laser-upgrade-implementation-300x300.jpg 300w, https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/PrintRBot-laser-upgrade-implementation-36x36.jpg 36w, https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/PrintRBot-laser-upgrade-implementation-32x32.jpg 32w\" sizes=\"auto, (max-width: 576px) 100vw, 576px\" \/><\/a><\/p>\n<h3>&nbsp;Mechanical:<\/h3>\n<p>As for mounting, we put ours on the side of the printer towards the front just right of the extruder. &nbsp; The dimensions and solid models are located in the&nbsp;<a title=\"Documentation\" href=\"https:\/\/jtechphotonics.com\/?page_id=602\">documents section of the website<\/a>&nbsp;so you can check it out before you buy. &nbsp;We suggest drilling the holes with the printout of the mount (or the lase mount itself) to make sure your holes are correct. &nbsp;Just hold it up to the side and mark it with a marker through the holes. &nbsp;Drill and then install. &nbsp;This shows the fan mount as well attached to the top of the laser. &nbsp;This allows the metal frame to help with heat sinking and have a fan at the same time.<\/p>\n<p><a href=\"https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/PrintRBot-Fan-Mount-Installation.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter size-medium wp-image-2497\" src=\"https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/PrintRBot-Fan-Mount-Installation-300x225.jpg\" alt=\"PrintRBot Fan Mount Installation\" width=\"300\" height=\"225\" srcset=\"https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/PrintRBot-Fan-Mount-Installation-300x225.jpg 300w, https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/PrintRBot-Fan-Mount-Installation-600x450.jpg 600w, https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/PrintRBot-Fan-Mount-Installation-1024x768.jpg 1024w, https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/PrintRBot-Fan-Mount-Installation.jpg 1632w\" sizes=\"auto, (max-width: 300px) 100vw, 300px\" \/><\/a><\/p>\n<h3>Software:<\/h3>\n<p>You shouldn\u2019t need to change anything with the marlin firmware that ships on the motherboard of the printer. &nbsp;Use the following commands in our inkscape pluggin (or whatever G Code SW you want):<\/p>\n<ul>\n<li>M106 Sxxx &nbsp; \u2013 Turn the laser ON at power XXX, where XXX is a number between 0 and 255.<\/li>\n<li>M106 S0 \u2013 Turn the laser OFF<\/li>\n<li>M107 \u2013 Another way to turn the laser OFF<\/li>\n<\/ul>\n<p>Examples:<\/p>\n<p>M106 S127 &nbsp; (Turns on the laser at a power of 50%)<br \/>\nM106 S255 &nbsp;(Turns on the laser at a power of 100%)<br \/>\nM106 S25 &nbsp;(Turns on the laser at a power of 10%)<\/p>\n<p>For running your programs, we generally like using <a href=\"http:\/\/www.repetier.com\/\">Repetier Host<\/a>&nbsp;software for our printer\/laser control. &nbsp;It has a nifty preview window and good manual control. &nbsp;You can set up the offset for the laser in the EE Prom settings and move the 0,0 point by creating an offset as well. &nbsp;Here is where to put your offset:<\/p>\n<p><a href=\"https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/EEprom2.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter size-medium wp-image-2498\" src=\"https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/EEprom2-300x207.jpg\" alt=\"EEprom2\" width=\"300\" height=\"207\" srcset=\"https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/EEprom2-300x207.jpg 300w, https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/EEprom2-600x414.jpg 600w, https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/EEprom2.jpg 624w\" sizes=\"auto, (max-width: 300px) 100vw, 300px\" \/><\/a><\/p>\n<p>And then you can use the manual tab to control the laser to turn it down for focusing. &nbsp;Use the fan slider to adjust the power and turn it on by pressing the fan.<\/p>\n<p><a href=\"https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/Manual-Laser-Control.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter wp-image-2499 size-medium\" src=\"https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/Manual-Laser-Control-300x170.jpg\" alt=\"Manual Laser Control\" width=\"300\" height=\"170\" srcset=\"https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/Manual-Laser-Control-300x170.jpg 300w, https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/Manual-Laser-Control-600x342.jpg 600w, https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/Manual-Laser-Control-1024x583.jpg 1024w, https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/Manual-Laser-Control.jpg 1529w\" sizes=\"auto, (max-width: 300px) 100vw, 300px\" \/><\/a><\/p>\n<p>&nbsp;<\/p>\n<h3 style=\"text-align: center;\">Check out our upgraded Simple engraving a picture on wood:<br \/>\n<a href=\"https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/Printrbot-Simple-Laser-Upgrade-engraving.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter size-medium wp-image-1880\" src=\"https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/Printrbot-Simple-Laser-Upgrade-engraving-300x225.jpg\" alt=\"Printrbot Simple Laser Upgrade engraving\" width=\"300\" height=\"225\" srcset=\"https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/Printrbot-Simple-Laser-Upgrade-engraving-300x225.jpg 300w, https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/Printrbot-Simple-Laser-Upgrade-engraving-600x450.jpg 600w, https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/Printrbot-Simple-Laser-Upgrade-engraving-36x27.jpg 36w, https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/Printrbot-Simple-Laser-Upgrade-engraving-150x112.jpg 150w, https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/Printrbot-Simple-Laser-Upgrade-engraving-32x24.jpg 32w, https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/Printrbot-Simple-Laser-Upgrade-engraving.jpg 816w\" sizes=\"auto, (max-width: 300px) 100vw, 300px\" \/><\/a><\/h3>\n<p>&nbsp;<\/p>\n<p><a href=\"https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/PrintRbot-Simple-Laser-Upgrade.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"alignnone wp-image-1878 size-full\" src=\"https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/PrintRbot-Simple-Laser-Upgrade.jpg\" alt=\"PrintRbot Simple Laser Upgrade\" width=\"270\" height=\"270\" srcset=\"https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/PrintRbot-Simple-Laser-Upgrade.jpg 270w, https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/PrintRbot-Simple-Laser-Upgrade-200x200.jpg 200w, https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/PrintRbot-Simple-Laser-Upgrade-100x100.jpg 100w, https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/PrintRbot-Simple-Laser-Upgrade-150x150.jpg 150w, https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/PrintRbot-Simple-Laser-Upgrade-36x36.jpg 36w, https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/PrintRbot-Simple-Laser-Upgrade-32x32.jpg 32w\" sizes=\"auto, (max-width: 270px) 100vw, 270px\" \/><\/a><img decoding=\"async\" src=\"http:\/\/printrbot.com\/wp-content\/uploads\/2013\/08\/slides-jr-front-right-320x320.png\" alt=\"slides-jr-front-right\"><img decoding=\"async\" src=\"http:\/\/printrbot.com\/wp-content\/uploads\/2013\/10\/plus-front-right-v2-320x320.png\" alt=\"plus-front-right-v2\"><\/p>\n<p>&nbsp;<\/p>\n<h1 style=\"text-align: center;\"><a title=\"Laser Upgrade Kits\" href=\"https:\/\/jtechphotonics.com\/?product_cat=laser-and-driver-combo-kits\">Buy your laser upgrade kit now!<\/a><\/h1>\n<h3><a href=\"https:\/\/jtechphotonics.com\/?product_cat=laser-and-driver-combo-kits\"><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter wp-image-1763 size-medium\" src=\"https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/10\/Highlight-FDA-Laser-Kit-8001-300x225.jpg\" alt=\"Highlight FDA Laser Kit 800\" width=\"300\" height=\"225\" srcset=\"https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/10\/Highlight-FDA-Laser-Kit-8001-300x225.jpg 300w, https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/10\/Highlight-FDA-Laser-Kit-8001-600x450.jpg 600w, https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/10\/Highlight-FDA-Laser-Kit-8001-36x27.jpg 36w, https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/10\/Highlight-FDA-Laser-Kit-8001-150x112.jpg 150w, https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/10\/Highlight-FDA-Laser-Kit-8001-32x24.jpg 32w, https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/10\/Highlight-FDA-Laser-Kit-8001.jpg 800w\" sizes=\"auto, (max-width: 300px) 100vw, 300px\" \/><\/a><\/h3>\n<p>&nbsp;<\/p>\n<h3 style=\"text-align: center;\">Remember Safety First!<\/h3>\n<p style=\"text-align: center;\"><a title=\"445nm Laser Shielding\" href=\"https:\/\/jtechphotonics.com\/?product=445nm-laser-shielding\"><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/01\/445nm-Laser-Shielding-Measurement-500x500-150x150.jpg\" alt=\"445nm Laser Shielding Measurement 500x500\" width=\"150\" height=\"150\"><\/a><\/p>\n<p style=\"text-align: center;\"><a title=\"445nm Laser Shielding\" href=\"https:\/\/jtechphotonics.com\/?product=445nm-laser-shielding\">We sell laser shielding to block laser radiation and reflections!<\/a><\/p>\n<p style=\"text-align: center;\">&nbsp;<a title=\"Laser Safety Goggles For 445nm Lasers\" href=\"https:\/\/jtechphotonics.com\/?product=laser-safety-goggles-for-445nm-lasers\"><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/jtechphotonics.com\/wp-content\/uploads\/2013\/10\/Goggles-150x150.jpg\" alt=\"Laser Safety Goggles 445nm\" width=\"150\" height=\"150\"><\/a><\/p>\n<p style=\"text-align: center;\"><a title=\"Laser Safety Goggles For 445nm Lasers\" href=\"https:\/\/jtechphotonics.com\/?product=laser-safety-goggles-for-445nm-lasers\">Laser Goggles are also a must!<\/a><\/p>\n<p><b>Disclaimer<\/b><\/p>\n<p><b>&nbsp;The laser used in this project is very powerful and all safety precautions must be taken.&nbsp; Use proper safety eyewear to prevent injury to eyes.&nbsp; This is a project and J Tech Photonics, Inc. is not responsible or liable for any and all damage or injury caused to people or property.&nbsp; The use of these instructions to make a laser cutter is under your own discretion and all safety precautions should be followed. &nbsp;J Tech Photonics, Inc. is not affiliated in any way with Printrbot and they may change hardware and software at any time making these instructions invalid.<\/b>&nbsp;<a href=\"https:\/\/jtechphotonics.com\/wp-admin\/post.php?post=1000&amp;action=edit\">(<em>edit<\/em>)<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>The PrintRBot is a cool printer that you can either assemble yourself or get an assembled kit. &nbsp;The machine uses the PrintRBoard which has been a part of the Rep Rap project for some time. &nbsp;The details are located here on the Rep Rap wiki: &nbsp;http:\/\/reprap.org\/wiki\/Printrboard Just like the other upgrade implementations, the easiest way&hellip;&nbsp;<a href=\"https:\/\/jtechphotonics.com\/?page_id=1058\" rel=\"bookmark\">Read More &raquo;<span class=\"screen-reader-text\">PrintRBot Upgrade<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"open","ping_status":"open","template":"","meta":{"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"neve_meta_sidebar":"","neve_meta_container":"","neve_meta_enable_content_width":"","neve_meta_content_width":0,"neve_meta_title_alignment":"","neve_meta_author_avatar":"","neve_post_elements_order":"","neve_meta_disable_header":"","neve_meta_disable_footer":"","neve_meta_disable_title":"","neve_meta_reading_time":"","footnotes":""},"class_list":["post-1058","page","type-page","status-publish","hentry"],"yoast_head":"<!-- This site is optimized with the Yoast SEO Premium plugin v27.9 (Yoast SEO v27.9) - https:\/\/yoast.com\/product\/yoast-seo-premium-wordpress\/ -->\n<title>PrintRBot Upgrade | J Tech Photonics, Inc.<\/title>\n<meta name=\"description\" content=\"J Tech Photonics, Inc. offers a PrintRBot upgrade that is easy to assemble. Visit our website to browse our inventory and learn more.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/jtechphotonics.com\/?page_id=1058\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"PrintRBot Upgrade\" \/>\n<meta property=\"og:description\" content=\"J Tech Photonics, Inc. offers a PrintRBot upgrade that is easy to assemble. Visit our website to browse our inventory and learn more.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/jtechphotonics.com\/?page_id=1058\" \/>\n<meta property=\"og:site_name\" content=\"J Tech Photonics, Inc.\" \/>\n<meta property=\"article:modified_time\" content=\"2020-05-07T21:00:05+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/PrintRBot-laser-upgrade-implementation.jpg\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"3 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/jtechphotonics.com\\\/?page_id=1058\",\"url\":\"https:\\\/\\\/jtechphotonics.com\\\/?page_id=1058\",\"name\":\"PrintRBot Upgrade | J Tech Photonics, Inc.\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/jtechphotonics.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/jtechphotonics.com\\\/?page_id=1058#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/jtechphotonics.com\\\/?page_id=1058#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/jtechphotonics.com\\\/wp-content\\\/uploads\\\/2014\\\/02\\\/PrintRBot-laser-upgrade-implementation.jpg\",\"datePublished\":\"2014-02-03T19:06:59+00:00\",\"dateModified\":\"2020-05-07T21:00:05+00:00\",\"description\":\"J Tech Photonics, Inc. offers a PrintRBot upgrade that is easy to assemble. Visit our website to browse our inventory and learn more.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/jtechphotonics.com\\\/?page_id=1058#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/jtechphotonics.com\\\/?page_id=1058\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/jtechphotonics.com\\\/?page_id=1058#primaryimage\",\"url\":\"https:\\\/\\\/jtechphotonics.com\\\/wp-content\\\/uploads\\\/2014\\\/02\\\/PrintRBot-laser-upgrade-implementation.jpg\",\"contentUrl\":\"https:\\\/\\\/jtechphotonics.com\\\/wp-content\\\/uploads\\\/2014\\\/02\\\/PrintRBot-laser-upgrade-implementation.jpg\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/jtechphotonics.com\\\/?page_id=1058#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/jtechphotonics.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"PrintRBot Upgrade\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/jtechphotonics.com\\\/#website\",\"url\":\"https:\\\/\\\/jtechphotonics.com\\\/\",\"name\":\"J Tech Photonics, Inc.\",\"description\":\"CNC Laser Upgrade Kits\",\"publisher\":{\"@id\":\"https:\\\/\\\/jtechphotonics.com\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/jtechphotonics.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/jtechphotonics.com\\\/#organization\",\"name\":\"J Tech Photonics, Inc.\",\"url\":\"https:\\\/\\\/jtechphotonics.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/jtechphotonics.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/jtechphotonics.com\\\/wp-content\\\/uploads\\\/2018\\\/06\\\/J-Tech-Logo-TM-SQ-JPG.jpg\",\"contentUrl\":\"https:\\\/\\\/jtechphotonics.com\\\/wp-content\\\/uploads\\\/2018\\\/06\\\/J-Tech-Logo-TM-SQ-JPG.jpg\",\"width\":600,\"height\":600,\"caption\":\"J Tech Photonics, Inc.\"},\"image\":{\"@id\":\"https:\\\/\\\/jtechphotonics.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"}}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"PrintRBot Upgrade | J Tech Photonics, Inc.","description":"J Tech Photonics, Inc. offers a PrintRBot upgrade that is easy to assemble. Visit our website to browse our inventory and learn more.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/jtechphotonics.com\/?page_id=1058","og_locale":"en_US","og_type":"article","og_title":"PrintRBot Upgrade","og_description":"J Tech Photonics, Inc. offers a PrintRBot upgrade that is easy to assemble. Visit our website to browse our inventory and learn more.","og_url":"https:\/\/jtechphotonics.com\/?page_id=1058","og_site_name":"J Tech Photonics, Inc.","article_modified_time":"2020-05-07T21:00:05+00:00","og_image":[{"url":"https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/PrintRBot-laser-upgrade-implementation.jpg","type":"","width":"","height":""}],"twitter_card":"summary_large_image","twitter_misc":{"Est. reading time":"3 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/jtechphotonics.com\/?page_id=1058","url":"https:\/\/jtechphotonics.com\/?page_id=1058","name":"PrintRBot Upgrade | J Tech Photonics, Inc.","isPartOf":{"@id":"https:\/\/jtechphotonics.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/jtechphotonics.com\/?page_id=1058#primaryimage"},"image":{"@id":"https:\/\/jtechphotonics.com\/?page_id=1058#primaryimage"},"thumbnailUrl":"https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/PrintRBot-laser-upgrade-implementation.jpg","datePublished":"2014-02-03T19:06:59+00:00","dateModified":"2020-05-07T21:00:05+00:00","description":"J Tech Photonics, Inc. offers a PrintRBot upgrade that is easy to assemble. Visit our website to browse our inventory and learn more.","breadcrumb":{"@id":"https:\/\/jtechphotonics.com\/?page_id=1058#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/jtechphotonics.com\/?page_id=1058"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/jtechphotonics.com\/?page_id=1058#primaryimage","url":"https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/PrintRBot-laser-upgrade-implementation.jpg","contentUrl":"https:\/\/jtechphotonics.com\/wp-content\/uploads\/2014\/02\/PrintRBot-laser-upgrade-implementation.jpg"},{"@type":"BreadcrumbList","@id":"https:\/\/jtechphotonics.com\/?page_id=1058#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/jtechphotonics.com\/"},{"@type":"ListItem","position":2,"name":"PrintRBot Upgrade"}]},{"@type":"WebSite","@id":"https:\/\/jtechphotonics.com\/#website","url":"https:\/\/jtechphotonics.com\/","name":"J Tech Photonics, Inc.","description":"CNC Laser Upgrade Kits","publisher":{"@id":"https:\/\/jtechphotonics.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/jtechphotonics.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/jtechphotonics.com\/#organization","name":"J Tech Photonics, Inc.","url":"https:\/\/jtechphotonics.com\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/jtechphotonics.com\/#\/schema\/logo\/image\/","url":"https:\/\/jtechphotonics.com\/wp-content\/uploads\/2018\/06\/J-Tech-Logo-TM-SQ-JPG.jpg","contentUrl":"https:\/\/jtechphotonics.com\/wp-content\/uploads\/2018\/06\/J-Tech-Logo-TM-SQ-JPG.jpg","width":600,"height":600,"caption":"J Tech Photonics, Inc."},"image":{"@id":"https:\/\/jtechphotonics.com\/#\/schema\/logo\/image\/"}}]}},"jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/jtechphotonics.com\/index.php?rest_route=\/wp\/v2\/pages\/1058","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/jtechphotonics.com\/index.php?rest_route=\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/jtechphotonics.com\/index.php?rest_route=\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/jtechphotonics.com\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/jtechphotonics.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=1058"}],"version-history":[{"count":0,"href":"https:\/\/jtechphotonics.com\/index.php?rest_route=\/wp\/v2\/pages\/1058\/revisions"}],"wp:attachment":[{"href":"https:\/\/jtechphotonics.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=1058"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}