{"id":30413,"date":"2022-03-12T08:40:49","date_gmt":"2022-03-12T14:40:49","guid":{"rendered":"https:\/\/jtechphotonics.com\/?post_type=product&p=30413"},"modified":"2026-02-04T15:58:18","modified_gmt":"2026-02-04T21:58:18","slug":"cnc4newbies-all-in-one-laser-and-mounting-kit-bundle","status":"publish","type":"product","link":"https:\/\/jtechphotonics.com\/?product=cnc4newbies-all-in-one-laser-and-mounting-kit-bundle","title":{"rendered":"CNC4Newbies All-in-One Laser and Mounting Kit Bundle"},"content":{"rendered":"

CNC4Newbies All in One Laser Mounting Kit Bundle<\/h2>\n

All the choices to add a laser to your CNC4Newbies Machine in one place.\u00a0 *Works well with the Designs by Phil DEMON controller*.<\/p>\n

1. Choose Your Power<\/h3>\n
\n
\n\n\n\n\n\n\n\n\n\n
Laser Model<\/strong><\/th>\nPower Output<\/strong><\/th>\nBest For<\/strong><\/th>\nCutting<\/strong><\/th>\nPhoto Engraving<\/strong><\/th>\n<\/tr>\n<\/thead>\n
7W+<\/strong><\/td>\nUp to 7W<\/td>\nDetailed photo engraving, hobby use<\/td>\n\u274c<\/td>\n\u2705<\/td>\n<\/tr>\n
14W+<\/strong><\/td>\nUp to 14W<\/td>\nAll-around engraving, light cutting<\/td>\n\u26a0\ufe0f Light cutting<\/td>\n\u2705<\/td>\n<\/tr>\n
34W 2-in-1 PRO<\/strong><\/td>\nUp to 34W<\/td>\nCutting 1\/4\u2033 wood, production speed<\/td>\n\u2705Faster<\/td>\n\u2705<\/td>\n<\/tr>\n
64W 3-in-1 PRO<\/strong><\/td>\nUp to 64W+<\/td>\nIndustrial-level cutting and speed<\/td>\n\u2705 Fastest<\/td>\n\u2705<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
\n
<\/div>\n
\ud83e\udde0\u00a0Tip:<\/strong>\u00a0The 64W laser includes three selectable modes (24W, 44W, 64W) for full versatility in both engraving and cutting. The 34W laser includes two selectable modes (34W, 17W).<\/div>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

Engraving Laser Comparison<\/h3>\n<\/div>\n

\"\"<\/h4>\n
\n

Cutting Laser Comparison<\/h3>\n

\"\"<\/p>\n

Photo Engraving Comparison<\/h3>\n

For a full detailed comparison<\/strong>, check out the blog post here<\/a>.\u00a0 The short answer is no<\/strong>, there is not a discernable difference<\/strong> between any of the lasers when engraving photos.<\/p>\n

\"J<\/a><\/p>\n

\n

<\/h3>\n

2.\u00a0 Choose your mount configuration<\/strong><\/p>\n

There are four options to mount your laser to your machine.\u00a0 You can mount it on the router\/spindle holder in the front.<\/p>\n

\"\"<\/a>\"\"<\/a><\/p>\n

Or you can mount it to the bottom of the 80mm spindle.\u00a0 You will need to make sure you have enough room on the bottom of your spindle to accommodate the laser.<\/p>\n

\"\"<\/a>\"\"<\/a><\/p>\n

The Makita and DeWalt clamp mounts fit onto the bottom of the router.\u00a0 Just make sure you router is pushed all the way down.<\/p>\n

\"\" \"\"<\/p>\n

 <\/p>\n

 <\/p>\n

3.\u00a0 Laser and Fan Extension Cable Length:<\/h4>\n

These laser and fan extension cables allow for longer distances from the laser driver to the laser. \u00a0If you machine is large and you don\u2019t want to mount the driver on the gantry, then these cables will allow for longer distances between the driver and the laser. \u00a0This distance adds to the already 3\u2032 laser and fan cable that comes standard.<\/p>\n

Cable is 18 AWG with Molex Mini fit Jr. connectors on each side.<\/p>\n

Lengths are 5\u2032, 10\u2032, 15\u2032, 20 and 25\u2032.<\/p>\n

For a 40″ x 40″ CNC4Newbies machine, you will need 10′ extension cables.\u00a0 Measure out the distance from your gantry to where you will mount your laser driver near the controller.<\/p>\n

4. Choose Your Power Cord:<\/h4>\n

We have options for U.S. (North America), UK (United Kingdom), EU (European Union), and AU (Australia).<\/p>\n

Seamless Integration with CNC for Newbies machines<\/h3>\n

The J Tech laser upgrade is plug-and-play compatible with CNC for Newbies\u00a0CNC machines<\/strong> \u2014\u00a0 Installation kits include everything you need:<\/p>\n