{"id":38786,"date":"2024-01-18T11:00:50","date_gmt":"2024-01-18T17:00:50","guid":{"rendered":"https:\/\/jtechphotonics.com\/?post_type=product&p=38786"},"modified":"2024-01-18T11:01:32","modified_gmt":"2024-01-18T17:01:32","slug":"elite-masso-rotary-upgrade","status":"publish","type":"product","link":"https:\/\/jtechphotonics.com\/?product=elite-masso-rotary-upgrade","title":{"rendered":"Elite Masso Rotary Upgrade"},"content":{"rendered":"

Upgrade your standard rotary into a Masso Elite Rotary<\/h2>\n

This upgrade package is for customers who have a standard rotary for the buildbotics or other controller and now have a Masso controller.\u00a0 \u00a0The Masso needs a closed loop stepper motor to be able to control the rotary.\u00a0 This upgrade package includes both the necessary motor and the cables associated with it to get it all working.<\/p>\n

Included in the package:<\/p>\n

-Closed Loop Stepper Motor with plastic housing
\n-Masso Rotary Cable<\/p>\n

Instructions:<\/h2>\n
    \n
  1. \u00a0Remove the M5 screws and nuts holding in the NEMA 23 Motor.<\/li>\n<\/ol>\n

    \"\"<\/p>\n

    2. Replace NEMA 23 motor with the new Closed Loop Stepper Motor included in the package.\u00a0 Use the same screws you just took out to hold it in place.<\/p>\n

    3.\u00a0 Adjust the tension on the belt so it is tight and lock down the screws with the nuts to keep it in place.<\/p>\n

    Once the motor has been changed out, follow the video instructions here to install the cable and set up the rotary.<\/p>\n