$4.99 – $12.99
Our laser kits comes with a 3′ cable included standard. Sometimes though you might need a longer cable to get to your controller. If you need a longer one and don’t want to use the screw terminals for the laser driver input then get this cable to attach to the Molex Mini Fit Jr. Connector in the back. Make your installation clean and tidy and have the ability to quickly disconnect the laser driver when not using it.
Connector: Molex Mini Fit Jr.
Cable Length: Optional (3′, 6′, 9′, 12′, 15′, 20′)
The laser kits come with a standard 3′ cable, but sometimes you need a longer cable to route through your machine. Cable comes in optional lengths but can be extended by adding additional cable to the end.
If you want to make your own cable, buy just the connector and terminals here:
| Weight | .05 lbs |
|---|---|
| Dimensions | 4 × .1 × .1 in |
| Cable Length | 3', 6', 9', 12', 15', 20' |
Reviews
There are no reviews yet.