If you’re using a J Tech Photonics laser on your CNC machine, there’s great news: Vectric’s Laser Module opens the door to precise and powerful laser engraving right inside Aspire, VCarve, or Cut2D. Whether you’re running a 7W+ laser or a powerful 64W 3-in-1, the Vectric Laser Module streamlines the engraving process with intuitive tools and impressive capabilities.
What is the Vectric Laser Module?
The Laser Module is an official add-on for Vectric’s design software that enables support for laser toolpaths. Instead of working around limitations with generic post processors or manually tweaking G-code, you get:
- Dedicated laser toolpaths for vector outlines, fills, and photo engraving
- Simplified setup with tool creation and material settings
- Visual previews of laser passes
- Full compatibility with J Tech laser post processors
Setting It All Up
Step 1: Install Your Post Processor Download the correct post processor for your J Tech laser and CNC controller. Vectric supports drag-and-drop installation from inside the software, making this quick and easy.
Step 2: Define Your Laser Tool In the tool database, set up a laser cutter with the correct spot size (e.g., 0.006″). Set feed rates and spindle speeds (which control PWM laser power) to match your laser’s specs.
Step 3: Pick the Right Toolpath
- Laser Cut+Fill: Great for vector engraving and cutting. You can trace outlines, engrave inside closed shapes, or do both in a single pass.
- Laser Picture: For photo-realistic image engraving. Import high-contrast JPEGs or PNGs and convert them into grayscale burn patterns.
Why This Rocks for J Tech Users
Using the Vectric Laser Module means you can:
- Get fast results with accurate burn paths
- Control laser power through PWM (works with most machines)
- Eliminate complex Z-axis movement with flat laser toolpaths
- Preview and tweak jobs before sending to your machine
Pro Tips
- For image engraving, start with lighter burns and test speed/power combos.
- For cutting, higher wattage lasers (24W, 44W, 64W) provide clean edges—especially with air assist.
- Always use proper laser goggles and follow all safety protocols from your J Tech kit.
Final Thoughts
The Vectric Laser Module isn’t just a convenience—it’s a game-changer. With full support for J Tech laser tools and safety interface boards, it’s never been easier to design, preview, and run laser projects from the same software you already use for CNC routing.
Ready to get started? Grab your post processor, define your tool, and light it up!
Need help choosing settings for your laser or setting up your Safety Interface Board? Visit our support page or reach out to us directly at [email protected].