J Tech discusses choosing the right laser power for various applications like engraving vectors, engraving photos, and cutting materials. They provide four power options: 7W, 14W, 24W, and 44W, and detail their performance. The 44W and 24W models are best for cutting, while 7W+ and 14W PRO SI excel at photo engraving.
At J Tech, we get this question a lot. There’s a ton of information on the internet about diode laser performance—some of it accurate, and some not so much. It can be challenging to discern what’s correct and make an informed decision about which laser power is the best fit for your application. This article aims to help with that.
Overall, we want to convey that both the 44W and 24W lasers are good for cutting and engraving, but they don’t perform as well for photos as the 7W+ and 14W PRO SI.
First, let’s discuss the different things you can do with the lasers, and then we’ll identify which laser power is best for each application. We’ll outline which laser is better for each of these categories:
Currently, J Tech offers four power options: 7W, 14W, 24W, and 44W. As power levels increase, your ability to process materials faster also increases, but so does the price.
7W+ Laser
14W PRO SI
24W PRO
44W PRO
This is the most common type of engraving, used for personalizing items with logos, names, dates, signs, and more. All of our lasers can perform this type of engraving. The 7W will be the slowest, and the 44W will be the fastest. The faster you can engrave, the quicker your project will be completed. So, if time is a concern and you’re trying to churn out cutting boards, go for the highest power you can afford to make the most of your machine.
The speed will also affect the darkness of your engraving. The faster you go, the lighter the engraving will be; the slower you go, the darker it will be. For a mid-level darkness on birch plywood at 100% power, here are the speeds you can expect:
Note, some CNC machines can’t reach the top speed with the 44W, so you will have to turn the power down. The J Tech PRO series V4 can raster at this speed and higher.
Here are some examples of the 44W engraving vectors deep and dark.
When it comes to cutting, the 24W and 44W excel. The 14W can cut some materials, but they need to be less dense and thin, like balsa wood. The 24W and 44W can easily cut through 1/4″ plywood and similar materials. For thick, dense wood, 1/4″ is about the maximum thickness. For less dense wood like pine, it can go up to 3/4″. For very low-density materials like foam, it can go up to 4″.
For non-wood items, cutting ability depends on density and color. For plastics, dark colors are better than light colors. Clear plastics won’t work—they allow the laser to pass through without cutting—but you can apply a coating to the top to engrave.
We can see the 44W and 24W cutting tests here:
Here are some examples of material cutting and speed for the 24W and the 44W lasers.
This type of engraving will take a photo and make a grey scale image onto wood or other items. While most engraving is done with vectors, it is kind of fun to engrave photos. All of the lasers can engrave photos, however the 7W+ and the 14W PRO SI can do a slightly better job. The number one factor for the quality of the photo engraving is not the laser choice, but is the image quality, editing, and processing before the image is imported into the software like Lightburn/Vetric.
If your primary focus is photo engraving, we recommend the 7W+ or the 14W PRO SI.
If you want to cut and engrave photos, consider getting either the 44W or 24W laser, and then add a 7W or 14W laser head for photo engraving. The 7W+ laser head is just $249.99 and uses the same cables, SI module, and mount that the 44W and 24W do, so swapping it out is easy.
All of the lasers can engrave photos. Here are some examples:
This was made by ‘The Grain Beneath’ with the 24W laser.
**Note – Artist states image was tweaked for hours before staring the project (brightness, contrast, ect.)**
In the end, you need to look at your budget and your application to determine which laser you want to upgrade for your shop.
For the best overall pick, we recommend the 44W laser for cutting and vector engraving, with an additional 7W+ or 14W PRO SI laser head just for photo engraving. This setup will give you the best cutting performance, the fastest vector engraving, and the most detailed photo engraving.
If your budget is smaller, then here are some recommendations:
No comments yet.