Shopping

Navigation

Onefinity CNC Magnet Mounting kit

$14.99 – $44.99

New 2 part magnet mount for the Onefinity machine.   Use this if you already have a J Tech Laser and want to switch it to the Onefinity or if you have an older style one piece mount.  The new two piece mount allows you to leave part on the machine to easily change the laser off without needing to remove screws.  For the 24W, 14W Pro SI and 7W+ they are a one piece mount.  We recommend the metal mount for the 44W which you can find here.

7W PRO laser mount is two pieces.
14W PRO laser mount is two pieces.
7W+ laser mount is one piece.
14W PRO SI 24V is one piece.
24W PRO laser mount is one piece.

Check the laser identification chart to make sure which laser you have.

Available with cables or just the mount.  Choose between Woodworker or Journeyman for cable length.

Full kit includes:

-10′ laser and fan extension cables (Woodworker)
-15′ laser and fan extension cables (Journeyman or Foreman)
-3′ input cable

SKU: Mount_Onefinity Category:

Description

This is the mount to use for transferring your J Tech Laser to the Onefinity CNC machine.

7W PRO laser mount is two pieces.
14W PRO laser mount is two pieces.
7W+ laser mount is one piece.
14W PRO SI 24V is one piece.
24W PRO laser mount is one piece.

Available as just the mount or a full mounting kit with cables.

 

Choose the correct version for your laser.  Look at your laser and see which you have.

 

Laser Identification Chart

Laser Identification Chart

 

 

 

 

7W PRO Installation Instructions

  1. Place top mount with sliders on front of router mount with M5x15mm screws.  Note the orientation.  The two alignment screws on the bottom should be facing forward, magnets in the back.

2. Remove M4 screws from back of laser.  Just the two back screws.

3. Place the bottom part of the two part mount onto the back of the laser head using the two M4 20mm screws.  Note the orientation in the picture.  Have the magnets facing forward and the two holes on top.

4. Adjust the level based on your machine and desired level for the laser.  Focus is 1/8″ below the laser shroud.

 

 

24W Laser Mount

 

Additional information

Weight .3 lbs
Dimensions 11 × 2 × .5 in
Mount Option

Full Kit Woodworker, Full Kit Journeyman/Foreman, Just the Mount
Laser Power

7W PRO, 7W+, 14W Dual PRO, 14W PRO SI 24V, 24W Quad PRO

Reviews

There are no reviews yet.

Be the first to review “Onefinity CNC Magnet Mounting kit”

Related products