Replacement Lens Cover for 24W & 44W Lasers

Description

This is the replacement lens cover for the 24W and 44W lasers.

Do not take the lens off the laser, just the cover.  Make sure not to scratch it and clean it after you are done changing it out.

Instructions:

24W:   Instruction document for cleaning or replacing 24W lens cover

44W:  Remove the screw holding the air assist onto the back of the laser shroud.  Slowly pull the air assist off the lens cover.  Do not pull too hard or you will remove the air hose on the air nozzle.  Move the nozzle to the side to get access to the lens cover.  Once changed, put back the nozzle and replace the screw in the back.