Laser Upgrade to SI Module

Description

The new lasers from J Tech include:

• 44W OCTO PRO
• 24W QUAD PRO
• 14W DUAL PRO SI
• 7W+

All of these lasers use the Safety Interface Module and the 4 pin Molex extension cables.  You can interchange any of the laser heads and not need to change cables or SI modules.

This upgrade will take your older 7W PRO or 14W DUAL PRO laser diode/s and put them into the new package that will work with the SI module.  This is great if you have the 44W laser for cutting and want to use your lower power for engraving.  All you need to do is swap the head out and you are good to go.

Upgrade Includes:

• New shroud with locking screws
• New mini driver integrated electronics
• New heatsink for the laser
• New wire harness
• Labor to transfer the diode/s to the new unit.

Once purchased, send your existing laser head (only the laser head) to:

J Tech Photonics Inc.
ATTN: LASER UPGRADE
2911 S Shore Blvd STE 150
League City, TX 77573

Put in it a note with your name, address, email, phone number and which upgrade we are doing.  Once it is completed, we will ship it back to you fully upgraded to work with the new SI module and the 24W and 44W lasers.