Description
Upgrade your older Pro Series V2 or V3 machine to the new Pro Series V4 Machine.
Why do this upgrade?
If you have a 24W or a 44W laser, then you probably are turning down your power to engrave. This causes you to spend extra time on your raster engravings where you don’t need to. The new larger NEMA23 motors allow for higher accelerations and higher speeds to allow for full use of the laser power. You can raster engrave at 1500 inch/min or more to finish your projects faster than ever before. Get more done in a shorter time.
Highlights
- Larger NEMA 23 Motors for increased acceleration and speed.
- Raster at over 1500inch/min to get your projects done faster
- Utilize your 24W or 44W at 100% power
- Self Squaring Feature
- Larger work area (V2)
- Industrial over molded cable system
This is a significant upgrade and will replace almost all of your old parts. Only attempt this if you want to take apart your whole machine and put it back together again with the new parts.
This upgrade includes:
- Nema 23 Controller
- 6amp 24V Power Adapter
- Nema 23 Motors with mounts
- Nema 14 motor
- Y Limit Switches (2)
- Motor cables X, Y, Y1, Z
- Limit switch cables Y, Y1
- X rail acrylic, car, hardware
- Y Idler pulleys (2)
- Button panel cables (2)
- Laser Cable (1)
- Air assist cable (1)
- Hardware
Reviews
There are no reviews yet.