Aztec Calendar Made Using VCarve Pro and a J Tech Laser We presented this project in the Vectric User group last October, and we thought… Read More »Making an Aztec calendar using VCarve Pro and a J Tech laser
e have been doing upgrade kits for GRBL machines like the X Carve and Shapeoko 2 and Shapeoko 3 machines for years now. Besides these… Read More »Picture Engraving with GRBL Machines
We ship all of our lasers with the High Efficiency AR Coated lens and have been doing this for about 3 years now. They push… Read More »Lens Comparisons
CNC Dust Boot The guys over at Suckit Dust Boot have made a very nice dust boot for the X Carve and are working on the… Read More »LaserSuckit™ Dust Boot
There are a lot of applications in which the ability to mark metal would be of use, especially something that stays on. This is why… Read More »Laser Powder Coating For Metal Panels
Here in the shop we use several software solutions for the purpose of engraving. Laser Etch is a very practical method for etching black… Read More »Laser Etch Software Basics
We have had a lot of questions on if our drivers can be put in parallel to allow more current. The short answer is YES!… Read More »5 Amp Dual Laser Driver Setup
We use Universal G Code sender on many of our GRBL machines in the shop. If you have an X Carve or a Shapeoko 3,… Read More »Universal G Code Sender Basics
Information on our Vectric Laser Post Processor</h2> We have been asked by a lot of people to make a laser post processor to the Vectric… Read More »Vectric Laser Post Processor
ABS Plastic Laser Cutting Kits These lasers really can do quite a lot of different materials. We have tried cutting ABS before with good results,… Read More »Laser Cutting 1/8″ ABS Plastic with 2.8W and 3.8W Laser Kits
