CNC4Newbies All-in-One Laser and Mounting Kit Bundle

CNC4Newbies All in One Laser Mounting Kit Bundle

All the choices to add a laser to your CNC4Newbies Machine in one place.  *Works well with the Designs by Phil DEMON controller*.

1. Choose Your Power

Cutting Laser Comparison

Photo Engraving Comparison

For a full detailed comparison, check out the blog post here.  The short answer is no, there is not a discernable difference between any of the lasers when engraving photos.

2.  Choose your mount configuration

There are four options to mount your laser to your machine.  You can mount it on the router/spindle holder in the front.

Or you can mount it to the bottom of the 80mm spindle.  You will need to make sure you have enough room on the bottom of your spindle to accommodate the laser.

The Makita and DeWalt clamp mounts fit onto the bottom of the router.  Just make sure you router is pushed all the way down.

3.  Laser and Fan Extension Cable Length:

These laser and fan extension cables allow for longer distances from the laser driver to the laser.  If you machine is large and you don’t want to mount the driver on the gantry, then these cables will allow for longer distances between the driver and the laser.  This distance adds to the already 3′ laser and fan cable that comes standard.

Cable is 18 AWG with Molex Mini fit Jr. connectors on each side.

Lengths are 5′, 10′, 15′, 20 and 25′.

For a 40″ x 40″ CNC4Newbies machine, you will need 10′ extension cables.  Measure out the distance from your gantry to where you will mount your laser driver near the controller.

4. Choose Your Power Cord:

We have options for U.S. (North America), UK (United Kingdom), EU (European Union), and AU (Australia).

Seamless Integration with CNC for Newbies machines

The J Tech laser upgrade is plug-and-play compatible with CNC for Newbies CNC machines —  Installation kits include everything you need:

• Mounting hardware
• Magnetic laser shroud
• Safety Interface Board (SI)
• Power supply
• Extension cables
• OD4+ safety goggles

We offer direct support for upgrading these machines, and yes — our systems work perfectly with LightBurn and Vectric software packages.

Endless Application Possibilities

Upgrade your machine with a J Tech Photonics laser and unlock a world of creative and production-ready applications:

• Engrave and cut wood for signs, cutting boards, coasters, and custom décor
• Engrave and cut dark acrylic with crisp detail and smooth edges
• Mark anodized aluminum and coated metals for logos, labels, and artwork
• Personalize tumblers, cups, and drinkware using a rotary attachment

🔒 Built-In Safety

J Tech Photonics prides itself on making our products the safest in the market.

Every system includes:

• Laser Enable Key
• Emergency stop/reset input
• Power Fault Protection
• Safety interlock for controller connection loss
• Emissions Indication
• Tilt Sensors (34W and 64W models)
• Compatible with ventilation and air assist systems

Laser Upgrade Air Assist Options

Air assist can really help with cleaner burns, faster cutting, and keeping your lens free of debris.

• The 64W, 34W and 14W+ laser comes with the integrated air assist nozzle, hose, and risers.
• For 7W+, the air assist nozzle kit is here:  Air Assist Nozzle Kit

Pump not included.  55W Aquarium Pump for Cutting

🧑‍🏫 J Tech Has Your Back

You’re not alone — we support thousands of laser upgrade users and provide:

• Install guides, videos, and diagrams
• Email/phone support from real engineers
• LightBurn setup help
• Materials and speed guidance

Ready to supercharge your CNC Machine?